- Description
- Reviews (0)
Description
6.5KVA – 48V Inverter – H
6.5KVA – 48V Inverter – H PRAG H-Series Pure Sine Wave Inverter / Charger
PRAG 6.5KVA – 48V Inverter H-Series Pure Sine Wave Inverter is a Durable and Fast Charging Inverter that combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%.
So, it is packed with unique features and it is one of the most advanced inverter/chargers in the market today.
Description
PRAG 6.5KVA – 48V Inverter H-Series (Pure Sine Wave) Inverter / Charger is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%.
So, it is packed with unique features and it is one of the most advanced inverter/chargers in the market today.
Furthermore, the PRAG 6.5KVA – 48V Inverter H-Series (Pure Sine Wave) features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.
Subsequently, PRAG 6.5KVA – 48V Inverter H-Series (Pure Sine Wave) is equipped with a powerful charger of up to 110-Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.
Features
- The PRAG Inverter is Easy to Install and Easy to Operate. This inverter is also Easy to Solve
- It is also designed to Operate under Harsh Environment
- The Inverter comes with the ability to do a DC Start & Automatic Self-Diagnostic Function
- It is Compatible with Both Linear and Non-Linear Load
- Furthermore, Low DC Voltage Supports Home and Office Appliances on the inverter
- With this PRAG Inverter, you can enjoy Powerful Charge Rate Up to 120Amp, Selectable from 0%-100%
- High Efficiency Inverter Design and “Power Saving Mode” to Conserve Energy
- Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
- 13 Vdc Inverter Battery Recover Point, Dedicated for Renewable Energy Systems
- 8 pre Set Battery Type Selector Plus De-sulphation for Totally Flat Inverter Batteries
- 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
- 8 ms Typical Transfer Time Between Utility and Inverter Battery, Guarantees Power Continuity
- 15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
- Battery DOD (Depth of Discharge) setting from 50% to 100%
Specifications
Inverter Output
- Model: PT-INV-6.5KVA/5000W 48V-Color LED, Wall-H
- Continuous Output Power: 5000W
- Surge Rating(20s): 15000W
- Capable of Starting Electric Motor: 5HP
- Output Waveform: Pure Sine wave/Same as input(Bypass mode)
- Nominal Efficiency: >88%(Peak)
- Line Mode Efficiency: >95%
- Power Factor: 0.9-1.0
- Nominal Output Voltage rms: 100-110-120Vac / 220-230-240Vac
- Output Voltage Regulation: ±10% RMS
- Output Frequency: 50/60Hz ± 0.3Hz
- Short Circuit Protection: Yes, Current Limit Function (Fault after 1sec)
- Typical Transfer Time: 10ms(Max)
- THD: < 10%
DC Input
- Nominal Input Voltage: 12.0Vdc (*2 for 24Vdc, *4 for 48Vdc)
- Minimum Start Voltage: 10.0Vdc
- Low Battery Alarm: 10.5Vdc / 11.0Vdc
- Low Battery Trip: 10.0Vdc / 10.5Vdc
- High Voltage Alarm & Fault: 16.0Vdc
- High DC Input Recovery: 15.5Vdc
- Low Battery Voltage Recover: 13.0Vdc
- Idle Consumption-Search Mode; < 25 W when Power Saver On
Charge
- Input Voltage Range: Wide: 90~135VAC / 164~243VAC, Narrow: 100~135VAC / 194~243VAC
- Input Frequency Range: Narrow: 47-55±0.3Hz for 50Hz, 57-65±0.3Hz for 60Hz Wide:43±0.3Hz plus for 50Hz/60Hz
- Output Voltage: Depends on battery type
- Charger Breaker Rating: 30A
- Max Charge Rate: 60 + 5A
- Over Charge Protection Shutdown: 15.7V for 12Vdc (*2 for 24Vdc, *4 for 48Vdc)
- Charger curve (4 stage constant current) 4 step digital controlled progressive charge: Battery types (*2 for 24Vdc, *4 for 48Vdc)
- Battery Type: Float Vdc
- Gel U.S.A: 13.7
- G.M 1: 13.4
- G.M 2: 13.7
- Sealed Lead Acid: 13.6
- Gel Euro: 13.8
- Open Lead Acid: 13.3
- Calcium: 13.6
- De-sulphation: 15.5 for 4hrs
- Remote Control: Yes. Optional
Bypass & Protection
- Input Voltage Waveform: Sine wave (Grid or Generator)
- Nominal Voltage: 220Vac
- Low Voltage Trip: 184V/140V±4%
- Low Voltage Re-engage: 194V/150V±4%
- High Voltage Trip: 253V/270V±4%
- High Voltage Re-engage: 243V/260V±4%
- Max Input AC Voltage: 280VAC
- Nominal Input Frequency: 50Hz or 60Hz (Auto detect)
- Low Freq. Trip: Narrow: 47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz, Wide:40±0.3Hz for 50Hz/60Hz
- Low Freq. Re-engage: Narrow: 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz, Wide:42±0.3Hz for 50Hz/60Hz
- High Freq. Trip: Narrow: 55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz, Wide: 70±0.3Hz for 50Hz/60Hz
- High Freq. Re-engage: Narrow: 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz, Wide: 68±0.3Hz for 50Hz/60Hz
- Output Short circuit protection: Circuit breaker
- Bypass breaker rating: 30A
- Transfer switch rating: 40amp for UL
- Max bypass current: 40amp
Mechanical Specification
- Mounting: Wall mount
- Inverter Dimensions(L*W*H): 720*350*300mm
- Inverter Weight: 36KG
- Shipping Dimensions(L*W*H): 760x320x310mm
- Shipping Weight: 38KG
- Display: Status LEDs / Status LEDs+LCD
- Standard Warranty: 1 Year
Reviews
There are no reviews yet.