• Description
  • Reviews (0)


EPSolar PWM Solar Charge Controller 30A 12V/24V – (LS3024B)

Product Description

  • 30A, 12/24V, Programmable
  • Three System Voltage Configuration: 12V, 24V or 12V/24V Auto Work
  • High Efficiency PWM Charging with Temperature Compensation
  • 3 LEDs shows PV Charging, Battery and Load Status
  • External Temperature Sensor Interface
  • RS-485 Bus Communication
  • Open Standard Modbus Communication Protocol
  • Software Update Function


More Powerful Functions via MT50 or PC

  • Diversified Load Control Modes: Manual, Light ON/OFF, Light ON + Timer, Time Control
  • Battery Type Selection: Gel, Sealed, Flooded and User Type
  • Real-time Monitor
  • Programmable Parameters
  • LVD or SOC Load Disconnect Function
  • Energy Statistics Function


Electronic Protections

  • PV Short Circuit
  • PV Reverse Polarity
  • Battery Over-charge
  • Battery Over-discharge
  • Battery Reverse Polarity
  • Load Short Circuit
  • Load Over-load
  • Over-heating



Model: VS6048BN

Nominal System Voltage: 12/24/36/48V Auto Work

Rated Battery Current: 60A

Rated Load Current: 60A

Max. Battery Voltage: 64V

Equalize Charging Voltage: Sealed: 14.6V, Flooded: 14.8V, User-defined: 9~17V

Boost Charging Voltage:                Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V, User-defined: 9~17V

Float Charging Voltage: Gel /Sealed /Flooded: 13.8V, User-defined: 9~17V

Low Voltage Reconnect Voltage: Gel /Sealed /Flooded: 12.6V, User-defined: 9~17V

Low Voltage Disconnect Voltage: Gel /Sealed /Flooded: 11.1V, User-defined: 9~17V

Self-consumption: =15m A(12V); =10mA(24V); =9Ma (36V); =8mA (48V)

Grounding: Common Negative

Temp. Compensation: -3mV/oC/2V

Relative Humidity: 10%~90% Non-condensation

Communication: RS485 / RJ45 Interface

LCD Temperature: -20oC ~ +70oC

Working Temperature: -25oC ~ +55oC

Humidity: =95% N.C.

Enclosure: IP30

Overall Dimension: 205 x 174 x 64(mm)

Terminals: 35mm2

Net Weight: 1.5kg


There are no reviews yet.

Be the first to review “EPEVER SOLAR CHARGE CONTROLLER 30A 12V/24V”